fbpx
TEMP Utility2017-06-15T12:38:27+00:00
Version 1.04  Aug 20, 1999

If you are unable to download software, please check the following:

  • Please register a myHioki account and then use it to log in to the myHioki service.
  • Product firmware (product upgrades) and computer application software can only be downloaded for products you have registered on the myHioki service.

  • Application(tut104e.zip)

    DOWNLOAD

Windows 95/98/NT4.0

The TEMP Utility program processes data from the 3443, 3444 and 3445 on a PC.

Specifications

・Memory data from the TEMPERATURE HiTESTER 3443 can be transferred to a PC and saved in a text file.
・Real-time measurement can be done with the TEMPERATURE HiTESTER 3444, 3445 connected to a PC.
・Memory and real-time measurement data can be transferred to Microsoft Excel.
・Real-time measurement data can be displayed on a graph.
・Displayed graphs can be converted to BMP format for various uses, such as for pasting into reports.
・Settings of the TEMPERATURE HiTESTER can be changed.

Version upgrade procedure

1.Click Download to download the file.
2.Decompress the downloaded file. Folder is created named tut104e.
3.Delete the old version of the TEMP Utility from the Add/Remove Programs Property in the Windows Control Panel.
4.Run Setup.exe in tut104e folder and follow the installation instructions.

Version Upgrade History

 ・Bugs and related fixes are described for each version.
 ・The [ Workaround ] sections describe measures to be taken to avoid known bugs when using an earlier version.
 
 V 1.04 (Newest Version)
Fixed the bug that caused real-time measurement data to sometimes fail to be saved when another channel was selected from the CH list immediately after finishing real-time measurement.
[ Workaround ]
Avoid clicking the CH list for about two seconds after measurement (until the menu and buttons return to their normal operating state).

Fixed the bug that caused the lowest digit of the logging time to be ignored (during otherwise seemingly normal operation) after entering a value of 100,000 or more as the logging time for real-time measurement or on the timer setup screen.
[ Modification ]
The entry value for logging time is now restricted to 0 to 99,999.
[ Workaround ]
Change the logging time units, if necessary, to keep entries below 100,000.

V1.03
Fixed the bug that caused an error to occur 8.89 hours after the last communication with the machine, forcing operations to terminate.
[ Workaround ]
Close the application within 8.89 hours after the last communication with the machine (either making a setting or finishing real-time measurement).

Fixed the bug that caused rounded values of calculation results, such as average values, to be shifted by 0.1.

Fixed the bug that caused an application error when writing data from the TEMP Utility to Excel97 and closing the Excel Workbook.
[ Workaround ]
Do not close the Workbook to finish the Excel application while writing data to Excel.

V1.02
Fixed the bug that caused stored measurement values between -9.9 to -0.1℃ to be read as 0.0℃ when reading memory data.
Fixed the bug that caused the lowest digit of the logging time to be ignored (during otherwise seemingly normal operation) after entering a value of 10,000 or more as the logging time for real-time measurement or on the timer setup screen.
[ Workaround ]
Change the logging time units to keep entries below 10,000.

Fixed the bug that caused an error to occur and operation to terminate when reading memory data, if the data table was displayed and an adjustment value was entered in the no-memory data state.
[ Workaround ]
Avoid entering (changing) adjustment values in the data table when there is no memory data.

V1.01
Initial release

Operating Environment

Computer: PC with at least an i486DX CPU running Windows 95, Windows 98 or Windows NT4.0.
Display: At least 800 x 600 dot resolution
Memory: At least 4 MB
Hard Disk: At least 4 MB free space

Contact Information

・We welcome your opinions, request, operating reports and bug reports. Please e-mail us at the following address.
・Please be advised that requests and opinions sent to this address may be used by us without other permission from the sender. However, we will send a small gift to those whose comments we may decide to use.
・E-mail: hioki@hiokiusa.com (HIOKI E. E. CORPORATION, International Sales and Marketing Section)

Translate »