If you are unable to download software, please check the following:
- Please register a myHioki account and then use it to log in to the myHioki service.
- Product firmware (product upgrades) and computer application software can only be downloaded for products you have registered on the myHioki service.
Windows Vista(32-bit or 64-bit)
Windows 7 (32-bit or 64-bit)
Windows 8 (32-bit or 64-bit)
.NET Framework 4.0
LCR Sample Application (IM3523/IM3533/IM3533-01/IM3536/IM3570/IM3590/IM7580)
(Communication control, Calculate Accuracy, Calculate Measure Range, Get screen image, Save and load settings)
1.This software is for following models.
2.This software has for following functions.
【Communication control, Calculate Accuracy, Calculate Measure Range, Get screen image, Save and load settings】
・This is a PC application program that will enable users of Impedance Analyzer to download data to a PC via RS-232C, GPIB, USB or LAN interface, save the data as a CSV file or Microsoft Excel file. In analyzer mode, it can automatically create a graph.
・This software has 6 measuring functions.
■Frequency Characteristics (By changing Frequency)
■Power Characteristics (By changing Power *Only IM7580)
■Voltage Characteristics (By changing Volt, V/CV Mode)
■Current Characteristics (By changing Cur, CC Mode)
■Time Interval Measurement (By setting up the time interval)
■Loading by Return key (Single Measurement)
・Following cable is required to communicate with PC.
■RS-232C…RS-232C cross cable(9pin-9pin)
■GPIB... GPIB-USB-HS from National Instruments
■USB... USB cable (A-B type)
■LAN... LAN cross cable
(【LCR mode】 Mesurement screen & Setting screen)
How to install
1.Click [Download] and download the file.
2.Execute the downloaded file to start the installation.
Note1: .NET Framework 4.0 is required to run this application program.
If it has not been installed in your PC, the following dialog box will be popped up.
Click on [Yes], and then go to the download page for NET Framework. Please download and install .NET Framework. Note2: If using this application program with the PC that doesn’t hook up to the Internet, at first, please download .NET Framework 4.0 on the Web page of the Microsoft company with another PC that hooks up o the Internet.
.NET Framework 4.0 can be downloaded on a page.
3.After installing the .NET Framework, try installing the application program again.
Version Upgrade History
V1.32 (Newest Version)
・Changed the program to restore the setting of :MEASure:VALid to its original state after terminating the application.
・Fixed following bugs that values rounded off after the decimal point are set incorrectly in the instrument. (models other than IM7580)
1.When setting the frequency in the setting screen of the LCR mode, the value rounded off after the decimal point is set in the instrument.
2.When setting the frequency in the setting screen of the ANALYZER mode, the value rounded off after the decimal point is set in the instrument.
3.When setting the frequency in the frequency sweep, the value rounded off after the decimal point is set at the instrument.
・Correspond to IM3536
・Add back-up function for IM3523.
・Correspond to IM7580.
・Fixed a bug in calculating accuracy of Cs-D, Cp-D, Ls-Q and Lp-D.
・Correspond to IM3590.
・Add Calculate Measurement Range function.
・The ”Get screen image” function is upgraded for IM3570.
・CPU: 1 GHz or faster processor clock
・RAM: At least 512 MB
・OS: Windows XP Service Pack 3/ Vista SP1 or later (32bit/64bit)/ 7 (32bit/64bit)/ 8 (32bit/64bit)
・Library: Microsoft .NET Framework 4.0
・Interface: RS-232C, GPIB, USB, LAN
・Monitor Resolution:1024 X 768 or higher
・Hard Disk:At least 5 MB free space
(Additional space is required for storing recorded data. Another 900 MB may be required if .NET Framework 4 is not yet installed.)
*HIOKI welcomes opinions, suggestions, operation reports, and bug reports. Please send such communications to the following address.
*HIOKI reserves the right to incorporate any suggestions and opinions received in its products without notice.