fbpx

NON-CONTACT AC VOLTAGE PROBE SP3000-01

Capture Voltage Signals from Outside the Wire Cover

CONTACT US
SKU: SP3000-01 Category:

Description

Model No. (Order Code)

SP3000-01Bundled with amplifier box and probe head

Note: Connect to a Memory HiCorder’s analog input terminal or oscilloscope. Both the SP3000 amplifier box and SP9001 probe head are necessary to measure.  Select Model SP3000-01 for the entire system.

CE

 

The SP3000 is a non-contact AC voltage waveform probe ideal for maintenance applications involving device control signals and sensor signals.  Simply apply the probe to a cable outside its insulation cover to capture the signal without exposing the technician to electrocution.

Key Features

• Observe waveforms with an oscilloscope or the Hioki Memory HiCorder by visualizing signals from electric equipment simply by applying the probe to the wire’s insulation
• Capture signals from electric equipment and communication lines
• Capture LIN and other communications signals
• Measure signals from electric equipment on vehicles

• Ideal for applications where:
- Miniaturization of devices and use of waterproof connectors make it impossible to establish contact with metal terminals
- Connectors can’t be removed due to reduced ability to reproduce phenomena
- There is need to avoid tearing the wire insulation so as to prevent risk of damage to the sensor due to static electricity

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)[Head of probe] AC VOLTAGE PROBE SP9001

Measurement methodCapacitive-coupled current cancellation (not suitable for use with bare conductors)
Measurable wire typeInsulated wire
Maximum input voltageRMS : 30 Vrms or less, Peak : 42.4 Vpeak or less
Dimensions and mass15.0 mm (0.59 in) (W) × 13.9 mm (0.55 in) (H) × 77.4 mm (3.05 in) (D) mm, 52 g (1.83 oz) (including cable)

[Main body measuring circuit] NON-CONTACT AC VOLTAGE PROBE SP3000

Rated measurement voltage5 V rms (14.14 Vp-p)
Output rate1 V/V
Rising time4.5 μs or less
Frequency band10 Hz to 100 kHz (-3 dB)
Voltage measurement precision±2.5% rdg. ±1% f.s. (0.5 Vrms to 5 Vrms)
Effects of wire under measurement±5% rdg. (Finished outer diameter φ1.0 to 2.5 mm, in a wire rod in conformity with UL1007, UL1015, AV, AVS, AVSS)
Power supply(1)USB bus power: USB mini receptacle: 5 V ±0.25 V DC
(2)AC Adapter Z1013: 5 V DC, 2.6 A
Rated supply voltage: 100 V to 240 V AC (50 Hz/60 Hz)
Anticipated transient overvoltage: 2500 V
Output terminalInsulated BNC (Measuring device connection side), Output resistance : 50 Ω
Dimensions and mass120 mm (4.72 in) (W) × 25 mm (0.98 in) (H) × 55 mm (2.16 in) (D), 160 g (5.64 oz) (including cable)
AccessoriesGround connection cable (1.5 m) ×1, Alligator clip ×1, USB cable ×1, Instruction manual ×1

Catalogs

NON-CONTACT AC VOLTAGE PROBE SP3000

Declaration of Conformity

NON-CONTACT AC VOLTAGE PROBE SP3000 [109KB]

Others

Contactless Voltage Probe Technology: Measuring Voltage Waveforms from Outside Signal Cables

Options

Non-contact Voltage measuring

 

NON-CONTACT AC VOLTAGE PROBE SP3000

Sold individually

AC VOLTAGE PROBE SP9001

Sold individually

Options

 

AC ADAPTER Z1013

100 V to 240 V AC

MAGNETIC ADAPTER 9804-02

Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)

CARRYING CASE C1011

Includes compartment for options

Voltage Input

*The L1000 is bundled with PQ3198 *Please inquire about voltage cord extension

 

MAGNETIC ADAPTER 9804-02

Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)

There are no drivers, firmware or software available for this product.