0 to 0.2 kV/5 kV AC Insulation and Hipot Tester
INSULATION / WITHSTANDING HiTESTER 3159-02
Description
The Hioki electrical safety testers are designed for insulation resistance and voltage withstand testing of electrical devices and components according to various safety standards. The 3159 and 3159-02 tests insulation resistance at 500V or 1000V and withstand voltage of up to 500VA in sequence.
Key Features
• Continuous testing of insulation (500/1000 V) and withstand voltage (500 VA transformer capacity)
• Insulation to withstand series test or witstand to insulation series test at auto mode, or individual test at manual mode
• Save up to 10 test settings each for the withstanding and insulation testing modes
• External I/O, RS-232C interface, Status output (relay contacts)
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
| [Withstanding test section] | |
|---|---|
| Testing voltage | 0 to 2.5 kV / 0 to 5.0 kV AC, 2 range configuration 500 VA (30 minutes rated) |
| Voltage setting | Manual setting |
| Waveform/Frequency | Same as the power supply waveform, synchronized with the power supply |
| Current measurement | 0.01 mA to 120 mA, True RMS rectified (digital display) |
| Voltage meter | Accuracy: ±1.5 % f.s. (digital), ±5 % f.s. (analog, f.s.=5 kV) |
| Current measurement | 0.01 mA to 120 mA, (Average value rectified, effective value digital display) |
| Measurement range | 2 mA/8 mA (0.01 mA resolution), 32 mA (0.1 mA resolution), 120 mA (1 mA resolution) |
| Voltage meter | Digital, Accuracy: ±1.5 % rdg. (f.s.=5.00 kV) |
| Judgment function | Window comparator method (Digital setting) |
| [Insulation test section] | |
| Testing voltage | 500 V DC, 1000 V DC, Unloaded voltage: 1 to 1.2 times rated voltage |
| Rated testing current | 1 to 1.2 mA, Shorted current: 4 to 5 mA (at 500 V), 2 to 3 mA (at 1000 V) |
| Measurement range, Accuracy | 0.5 MΩ to 999 MΩ (at 500 V), and 1 MΩ to 999 MΩ (at 1000 V): ±4 % rdg., 1000 MΩ to 2000 MΩ: ±8 % rdg. |
| Judgment function | Window comparator method (Digital setting) |
| [Timer section] | |
| Setting range | 0.5 to 999 s |
| [General section] | |
| Monitor function | Output voltage, detected current, insulation resistance, Refresh rate: 2 times/s |
| Power supply | 220 V AC, (50/60 Hz), 800 VA max. |
| Dimensions and mass | 320 mm (12.60 in)W × 155 mm (6.10 in)H × 330 mm (12.99 in)D, 21.5 kg (758.4 oz) |
| Accessories | H.V. Test lead 9615 (high voltage side and return, 1 each) ×1, Power cord ×1, Instruction manual ×1, Spare fuse ×1 |
Options
Input/Output cords
*The 9615 is bundled
H.V. TEST LEAD 9615
Red, Black each 1, 1.5 m (4.92 ft) length
REMOTE CONTROL BOX (SINGLE) 9613
For Start/Stop control, 1.5m (4.92 ft) cord length
REMOTE CONTROL BOX (DUAL) 9614
For Start/Stop control, 1.5m (4.92 ft) cord length
Other
SAFETY TEST DATA MANAGEMENT SOFTWARE 9267
• PC software for controlling electrical safety measuring instruments
PC communication
RS-232C CABLE 9637
For the PC, 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length
RS-232C CABLE 9638
For the PC, 9 pins - 25 pins, cross, 1.8m (5.91 ft) length
There are no drivers, firmware or software available for this product.
Related products
-
- Insulation resistance testing: up to 9999 MΩ Withstanding voltage testing: up to 5 kV AC/DC Full remote control
0.2 kV to 5 kV AC Programmable and Fully Remote Controllable Automatic Hipot Tester
-
- Insulation resistance test: up to 2000 MΩ Withstanding voltage test: up to 5 kV AC Contact check Full remote control
Fully Remote Controllable Hipot Tester with Contact Check Functionality
-
- Supports remote control For automatic multipoint testing of insulation / withstand voltage Use with the 3153's program or with general-purpose logic sequencers
5kV AC/DC High Voltage Scanner that Supports Automatic Multi-point Testing