10× the Sensitivity of Conventional Probes Deliver Precise Measurement of Low Current Waveforms from 1 mA
CURRENT PROBE CT6701
Description
Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The CT6701 is a high-sensitivity current probe that offers a wide DC to 120 MHz bandwidth and 5A of continuous input, and is ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers.
Key Features
• Wide band: [CT6700] DC to 50 MHz (-3 dB), [CT6701] DC to 120 MHz (-3 dB)
• High S/N characteristic ideal for ultra low 1 mA order current waveforms
• Connect directly to an oscilloscope’s BNC input terminal *1
*1 Connecting the device’s metal BNC terminal to a Memory HiCorder’s plastic BNC terminal may damage the plastic terminal or cause it to become misshapen.
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 6 months)
| Frequency bandwidth | DC to 120 MHz (-3 dB) |
|---|---|
| Rise time | 2.9 ns or shorter |
| Noise level | 60 μA rms typical, 75 μA rms max (for 30 MHz band measuring instrument) |
| Continuous allowable input | 5 A rms (DC, and sine wave, requires derating at frequency) |
| Max. allowable peak input | ±7.5 A peak (non-continuous) |
| Amplitude accuracy | Typ.: ±1% rdg. ±1 mV (DC, 45 to 66 Hz sine wave, 0 to 5 A rms) Guaranteed: ±3% rdg. ±1 mV (DC, 45 to 66 Hz sine wave, 0 to 5 A rms) |
| Output rate | 1 V/A (use with a device having a 1 MΩ input resistance or higher) |
| Measurable conductors | Insulated conductor |
| Core diameter | φ 5 mm (0.20 in) |
| Power supply | ±12 V ±0.5 V, 3.2 VA |
| Dimensions and mass | Sensor: 155 mm (6.10 in)W × 18 mm (0.71 in)H × 26 mm (1.02 in)D, Terminator: 29 mm (1.14 in)W × 83 mm (3.27 in)H × 40 mm (1.57 in)D mm, Mass: 250 g (8.8 oz), Sensor cable BNC terminal: 1.5 m (4.92 ft), Power cable: 1 m (3.28 ft), Power plug: FFA.0S.304.CLAC37Y / LEMO inc. |
| Accessories | Instruction manual ×1, Carrying case ×1 |
Catalogs
CURRENT PROBE CT6700,CT6701 
Catalog: CURRENT PROBE series CT6700, CT6701, 3273-50, 3274, 3275, 3276
Technical Notes
Current Probe CT6700/CT6701
High-precision, Wideband, High Stable Current Sensing Technology
Declaration of Conformity
CURRENT PROBE CT6700,CT6701 [122KB]
Options
Power supply
*Not necessary when using Current Unit 8971.
POWER SUPPLY 3269
• For Hioki wide bandwidth current probes • Connect up to four sensors
There are no drivers, firmware or software available for this product.
Related products
-
- DC to 100MHz (-3dB) 30Arms maximum input 0.1V/A output φ 5 mm (0.20 in) core dia.
Wideband DC to 100 MHz/30A AC/DC Current Probe for Oscilloscopes
-
- DC to 10MHz (-3dB) 150Arms maximum input 0.01V/A output φ 20 mm (0.79 in) core dia.
Wide band DC to 10 MHz/150A AC/DC Current Probe for Oscilloscopes
-
- 3 ranges in a single probe - 30 A, 5 A, 0.5 A. Observe a wide current range from micro currents to 30 A. Wide band: DC to 50 MHz (-3 dB) High S/N ratio and 10 times output rate: Observe waveforms at 100 μA/div at oscilloscope maximum voltage sensitivity setting of 1 mV/div Directly connect to an oscilloscope’s BNC input terminal *1 Also available: CT6711 Current Probe with DC to 120 MHz bandwidth
Capture Inrush, Micro and High-Speed Currents with a Single Probe
-
- DC to 2MHz (-3dB) 500Arms maximum input 0.01V/A output φ 20 mm (0.79 in) core dia.
Wideband DC to 2 MHz/500A AC/DC Current Probe for Oscilloscopes