100A Voltage Output Sensor for Current Load Measurements
CLAMP ON SENSOR 9695-03
Model No. (Order Code)
|9695-03||For the PW3198 or other|
Hioki current sensors are best-in-class devices for use with power meters, PQAs and Memory HiCorders. The 9695-03 is a 100A AC voltage output clamp sensor for measuring load current.
• 40 Hz to 5 kHz bandwidth
• Phase: 45 Hz to 5 kHz
• Rated 100A AC
• 1 mV AC /A output
• φ15 mm (0.59 in) dia.
• Connect to the data acquisition equipment using the 9219 Connection Cord
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)* f.s. is the sensorʼs rated primary current value.
|Primary current rating||100 A AC|
|Max. allowable input||Continuous 130 Arms (45 to 66 Hz)|
|Output voltage||AC 1 mV/ A|
|Amplitude accuracy||±0.3 % rdg. ±0.02 % f.s. (45 to 66 Hz)|
|Phase accuracy||±1° (45 to 5 kHz)|
|Frequency characteristics||40 Hz to 5 kHz: ±1.0 % (Amplitude deviation from accuracy)|
|Max. rated voltage to earth||Less than 300 Vrms (Insulated conductor)|
|Core diameter||φ 15 mm (0.59 in)|
|Power supply||Not required|
|Dimensions and mass||50.5 mm (1.99 in)W × 58 mm (2.28 in)H × 18.7 mm (0.74 in)D, 50 g (1.8 oz)|
|Output terminal : M3 terminal (outside 3 mm, 0.12 inch diameter)
Option: Connection cable 9219 (3 m, 9.84 ft length)
Measure the High-Order Harmonic Voltage and Current of Power Lines
Power Quality Survey of Solar Power Generation Systems
There are no drivers, firmware or software available for this product.