1000A Voltage Output Sensor for Current Load Measurements
CLAMP ON SENSOR 9669
Hioki current sensors are best-in-class devices for use with power meters, PQAs and Memory HiCorders. The 9669 is a 1000A AC voltage output clamp sensor for measuring large load current.
• For inverter devices or commercial power lines
• Measure up to 1000A AC continuously
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)Note: In addition to the Power Quality Analyzer, can also be used as a current sensor with HIOKI's power meter and voltage input recorders.
|Rated primary current||AC 1000 A|
|Output voltage||AC 500 mV f.s. (AC 0.5 mV/A)|
|Amplitude accuracy||±1.0 % rdg. ±0.01 % f.s. (45 - 66 Hz, f.s.= rated primary current)|
|Phase accuracy||±1 ° (at 45 Hz - 5 kHz)|
|Max. allowable input||Continuous 1000 A rms (at 45 - 66 Hz)|
|Frequency characteristics||40 Hz to 5 kHz: ± 2.0%
(deviation from accuracy)
|Max. rated voltage to earth||AC 600 V rms (insulated wire)|
|Core diameter||φ 55 mm (2.17 in) or 80 mm (3.15 in) × 20 mm (0.79 in) busbar|
|Dimensions and mass||99.5 mm (3.92 in) W × 188 mm (7.40 in) H × 42 mm (1.65 in) D, 590 g (20.8 oz), cord length: 3 m (9.84 ft)|
CLAMP ON SENSOR 9669 [671KB]
Declaration of Conformity
CLAMP ON SENSOR 9669 [121KB]
Evaluate Data Center Infrastructure Efficiency and Power Usage Effectiveness
Measure the High-Order Harmonic Voltage and Current of Power Lines
Power Quality Survey of Solar Power Generation Systems
There are no drivers, firmware or software available for this product.