Ideal for Measuring AC Current with Low Frequencies such as Inverter Control Devices
CLAMP ON SENSOR 9272-05
Description
Hioki current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes.
The 99272-05 is a 1Hz to 100 kHz AC current sensor ideal for measuring low frequency equipment such as inverters.
CAT III 600V
Key Features
• Superior low frequency and phase characteristics suitable for testing the current and power of inverter control devices
• Wide 1 Hz to 100 kHz frequency bandwidth perfect for harmonic analysis, FFT analysis and waveform monitoring (AC only)
Model No. (Order Code)
| 9272-05 | 20/200 A AC, ME15W terminal |
|---|
Note: This product cannot be used alone. The optional Sensor Unit is required in order to supply power and connect the clamp to a Memory HiCorder or other instrument. The clamp can be directly connected to a compatible Power Meter, or Power Analyzers.
-
Basic specifications (Accuracy guaranteed for 6 months, Post-adjustment accuracy guaranteed for 6 months)
| Rated current | 20 A AC, or 200 A AC (selectable) |
|---|---|
| Max. allowable input | 50 A rms (at 20 A range), 300 A rms (at 200 A range) |
| Frequency characteristics | 1 Hz (±2 % rdg. ±0.1 % f.s.) to 100 kHz (±30 % rdg. ±0.1 % f.s.) |
| Amplitude and Phase accuracy | Amplitude: ±0.3 % rdg. ±0.01 % f.s. Phase: ±0.2 ° (45 to 66 Hz) |
| Output voltage | 2 V/20 A rated current range, or 2 V/200 A rated current range (voltage output with the Sensor Unit, use with a device having a 1 MΩ input resistance or higher) |
| Max. rated voltage to earth | 600 V rms (CAT III) |
| Core diameter | φ 46 mm (1.81 in) |
| Power supply | ±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC) |
| Power consumption | 5 VA Max. (when measuring 200 A) |
| Dimensions and mass | 78 mm (3.07 in) W × 188 mm (7.40 in) H × 35 mm (1.38 in) D, 430 g (15.2 oz), cord length: 3 m (9.84 ft) |
| Accessories | Carrying case 9355 ×1, Instruction manual ×1, Mark bands ×6 |
Compatible models
| Compatible models | 9272-05 | |
|---|---|---|
| Power Analyzer PW3390 | Ok | |
| Power Analyzer 3390 | △ (Requires CT9901) | |
| Power HiTester 3193 series | △ (Requires CT9901) | |
| Current Unit 8971 | △ (Requires the 9318, CT9901) | |
| F/V Unit 8940 | △ (Requires the 9318, the 9705, CT9901) |
Options
Connection Options
* L9217: for motor analysis input
CONNECTION CORD L9217
Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length
Current sensors for the F/V Unit 8940
*To connect the current sensor via the conversion cable for the F/V Unit 8940, or using with the Power supply unit 9555-10.
CONVERSION CABLE 9705
0.2 m (0.66 ft) length, to connect the CT6841-6846, CT6863/6865, 9709, 9272-10 to the F/V Unit 8940, Cannot be used in combination with the CT6862
Option A
The CT9901 is for connecting the PW9100 to the 3390
CONVERSION CABLE CT9901
ME15W (12 pin) to PL23 (10 pin) connector
Option B
Only 1 unit of CT9902 can be used at any one time.
EXTENSION CABLE CT9902
5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector
Other options for Input
CONNECTION CORD L9217
Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length
CONNECTION CORD 9165
Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length
CONVERSION CABLE 9318
To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length
PL23 (10 pin) - ME15W (12 pin) conversion
*When using a 10-pin sensor without “-05” in the model number, Conversion Cable CT9900 must be used to connect to 12-pin terminal.
CONVERSION CABLE CT9900
Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal
POWER SUPPLY for Current Sensors
*A separate power supply (CT955x) is required in order to use a high-precision current sensor.
SENSOR UNIT CT9555
• Power supply for current sensors when used alone • 1ch, with Waveform output
SENSOR UNIT CT9556
• Power supply for current sensors when used alone • 1ch, with Waveform/RMS output
SENSOR UNIT CT9557
• Power supply for current sensors when used alone • 4ch, with Waveform/Total Waveform/Total RMS output
Up to 4000 A (High precision)
Aggregate and measure large currents in multi-cable circuitsUse multiple AC/DC Current Sensor CT6865-05 or AC/DC Current Probe CT6846-05 units with the Sensor Unit CT9557 to measure currents of up to 4000 A in multi-cable circuits. Requires 1 connection cable to connect the PW6001/PW3390 to the CT9557.
SENSOR UNIT CT9557
• Power supply for current sensors when used alone • 4ch, with Waveform/Total Waveform/Total RMS output
There are no drivers, firmware or software available for this product.
English 
Spanish 
Portuguese