Multi-range 1000A Voltage Output Sensor for Capturing Waveforms with DMMS, Memory HiCorders and other data acquisition equipment

Shop Now



Model No. (Order Code)

9132-50BNC output terminal

Note: For 50/60Hz commercial power lines; no external power supply required.



Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9132-50 is multi-range 1000A AC voltage output clamp sensors for capturing waveforms with DMMs and Memory HiCorders.

Key Features

• Economical clamp sensors for waveform recording with Memory HiCorders
• Choose from up to six general-purpose ranges



Basic specifications (Accuracy guaranteed for 1 year)

Rated current20 A to 1000 A AC, 6 ranges
Accuracy±3 % rdg. ±0.2 % f.s. (45 to 66 Hz)
Frequency characteristicsAdd to amplitude accuracy for frequencies from 40 to 1 kHz: ± 1 % rdg.
Output rate0.2 V AC f.s. (f.s. = setting rage)
(Connect to a voltage input device providing a high input impedance of 1 MΩ)
Max. allowable input1000 A rms continuous (all ranges)
(For 40 Hz to 500 Hz: 100 %, and for 500 Hz to 1 kHz: within 90 % of derating)
Max. rated voltage to earth600 Vrms (50/60 Hz, CAT III)
Core diameterφ55 mm (2.17 in), or 20 mm (0.79 in) × 80 mm (3.15 in) busbar
Dimensions and mass100 mm (3.94 in)W × 224 mm (8.82 in)H × 35 mm (1.38 in)D, 600 g (21.2 oz), cord length: 3 m (9.84 ft)
AccessoriesInstruction manual ×1


CLAMP ON PROBE 9132-50 [177KB]

CLAMP ON PROBE 9132-50 [292KB]

Declaration of Conformity

CLAMP ON PROBE 9132-50 [121KB]


Input Probes

*L9170-10 is a bundled accessory. *Requires the 9704 to connect a Clamp-on probe



Receiving end: Female BNC; Output end: Male banana-plug *Not compatible with older generation Memory Hicorders with banana input terminals

Evaluate the Input/Output Characteristics of a Power Conditioner for Mega Solar Power Generation 

There are no drivers, firmware or software available for this product.