Delivering Wide-bandwidth and High-precision Current Measurement
AC/DC CURRENT SENSOR CT6863
Description
Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6863 is a DC to 500kHz/200A sensor, and this is ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc.
CAT III 1000 V
Key Features
• Super high precision, ±0.05% amplitude accuracy, ±0.2° phase accuracy
• Applications in the fields of electric and hybrid electric vehicles
• Wide operating temperature range fit for automobile applications
• Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters
• For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with SENSOR UNIT)
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
| Rated current | 200 A AC/DC |
|---|---|
| Max. allowable input | 400 A (requires derating) |
| Frequency characteristics | Amplitude: DC to 500 kHz Phase: DC to 300 kHz |
| Amplitude and Phase accuracy | DC ±0.05 % rdg. ±0.01 % f.s. (Phase: Not defined) 16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2°) Defined to 500 kHz |
| Output voltage | 2 V /rated current value (voltage output with the Sensor Unit, use with a device having a 1 MΩ input resistance or higher) |
| Max. rated voltage to earth | AC/DC 1000 V (50/60 Hz, CAT III ) |
| Core diameter | φ 24 mm (0.94 in) |
| Operating temperature, humidity | -30°C to +85°C (-22°F to 185°F), 80% RH or less (with no condensation) |
| Power supply | ±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC) |
| Power consumption | 6 VA max. (at 200 A/55 Hz, ±12 V power requirement) |
| Dimensions and mass | 70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, 350 g (12.3 oz), cord length: 3 m (9.84 ft) |
| Accessories | Instruction manual ×1, Mark bands ×6 |
Model CT6863 Compatibility
| Compatible models | CT6863 Combination status |
|---|---|
| Model PW6001 | OK |
| Model 3390 | OK |
| Model 8971 for the MR8827, MR8847 series | OK |
| Input unit Model 9602 for the 3193-10/3193/3194 | OK In combination, recognized as the 9278 |
| Model 8940 for Memory HiCorders | Requires Conversion Cable 9705 and Conversion Cable 9318, used as a substitute for the 9278 |
Catalogs
AC/DC CURRENT SENSOR CT6862, CT6863, 9709 
Catalog: AC/DC CURRENT SENSOR CT6860 series
SENSOR UNIT CT9555, CT9556, CT9557
Technical Notes
High-precision, Wideband, High Stable Current Sensing Technology
Declaration of Conformity
AC/DC CURRENT SENSOR CT6862,CT6862-05,CT6862-10,CT6863,CT6863-05,CT6863-10 [100KB]
Options
Current sensors for the F/V Unit 8940
*To connect the current sensor via the conversion cable for the F/V Unit 8940, or using with the Power supply unit 9555-10.
CONVERSION CABLE 9705
0.2 m (0.66 ft) length, to connect the CT6841-6846, CT6863/6865, 9709, 9272-10 to the F/V Unit 8940, Cannot be used in combination with the CT6862
Option A
The CT9901 is for connecting the PW9100 to the 3390
CONVERSION CABLE CT9901
ME15W (12 pin) to PL23 (10 pin) connector
Option B
Only 1 unit of CT9902 can be used at any one time.
EXTENSION CABLE CT9902
5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector
Options B
The CT9903 connects up to 2 cables in series, Cannot be used in combination with the 9277 to 9279
EXTENSION CABLE CT9903
5 m (16.41 ft) length, PL23 (10 pin) - PL23 (10 pin) connector
Other options for Input
CONNECTION CORD L9217
Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length
CONVERSION CABLE 9318
To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length
CONNECTION CORD 9165
Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length
PL23 (10-pin) - ME15W (12-pin) conversion
CONVERSION CABLE CT9900
Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal
POWER SUPPLY for Current Sensors
*A separate power supply (CT955x) is required in order to use a high-precision current sensor.
SENSOR UNIT CT9557
• Power supply for current sensors when used alone • 4ch, with Waveform/Total Waveform/Total RMS output
SENSOR UNIT CT9556
• Power supply for current sensors when used alone • 1ch, with Waveform/RMS output
SENSOR UNIT CT9555
• Power supply for current sensors when used alone • 1ch, with Waveform output
There are no drivers, firmware or software available for this product.
Related products
-
- DC to 5 kHz (-3dB)
- Rated 600 A AC/DC 1mV/A output φ 33 mm (1.30 in) core dia.
600 A AC/DC Detachable Current Sensor System that Delivers Stable, Long-term, and Accurate Measurements in Dramatically Changing Environments
-
Raising the Bar for High-Accuracy Measurement
-
- Use with CT7000 series Current sensor DCA, ACA, (DC+AC)A, frequency Output to oscilloscopes: WAVE, RMS, PEAK, Hz Power supply for single sensor
Display and Output Unit for the CT7600 and CT7700 Series AC/DC Current Sensors
-
- DC to 10kHz (-3dB) Rated 100 A AC/DC
- 1mV/A output φ 33 mm (1.30 in) core dia.
100 A AC/DC Detachable Current Sensor System for observing instantaneous waveforms