JCSS calibration

Home/Support/JCSS calibration
JCSS calibration 2017-06-14T13:18:50+00:00

Hioki, the JCSS, ISO/IEC 17025, and MRAs

Hioki (Head Office) is a JCSS calibration provider. JCSS calibration certificates issued by Hioki include language certifying compliance with ISO/IEC 17025 and MRAs and bear certification symbol marks (“ilac-MRA,” “JCSS,” and “IAJapan”).

 

Certification certificates bearing certification symbols serve as evidence of the following

  • Traceability to Japanese national measurement standards
  • The technological capabilities of the calibration provider
  • Acceptance in international MRA member countries (APLAC and ILAC)

 

Examples of certification systems other than JCSS that satisfy ISO/IEC 17025

NVLAP, A2LA (U.S.A.), UKAS (UK), DKD (Germany), NATA (Australia), CNAS (China), KOLAS (South Korea), JAB (Japan)

 

*Related terminology

ISO/IEC 17025 (JIS Q 17025)
“General requirements for the competence of testing and calibration laboratories”
JCSS
Japan Calibration Service System. JCSS is a signatory to the APLAC/MRA. JCSS registered standards satisfy the requirements of Measurement Act-related laws and regulations as well as ISO/IEC 17025.
MRA
Mutual Recognition Arrangement
ILAC
International Laboratory Accreditation Cooperation
APLAC
Asia Pacific Laboratory Accreditation Cooperation

 

JCSS calibration scope

The following table outlines Hioki’s JCSS calibration scope. Please contact Hioki for more information as some products are not eligible for calibration.

Accreditaion No.:JCSS0156
Date of initial Accreditation : June 11.2008

 

DC voltage (generation devices, measurement devices) 0.1 V,1 V,10 V,100 V,1000 V
DC resistance (resistors, measurement devices) 1 Ω,10 Ω,100 Ω,1 kΩ,10 kΩ,100 kΩ,1 MΩ
DC current
(1) Generation devices
(2) Measurement devices
(3) Measurement devices (clamp current measurement devices)
100 μA,1 mA,10 mA,100 mA
100 μA,1 mA,10 mA,100 mA
9 A,18 A,90 A,180 A,450 A,900 A
AC voltage (generation devices, measurement devices) 1 V,10 V,100 V,700 V(50 Hz, 60 Hz, 1 kHz)
AC current
(1) Generation devices
(2) Measurement devices
(3) Measurement devices (clamp current measurement devices)
10 mA,100 mA,1 A(50 Hz, 60 Hz)
10 mA,100 mA,1 A(50 Hz, 60 Hz)
9 mA,27 mA,90 mA,270 mA,0.9 A,5 A,9 A,18 A,27 A,40 A,54 A,90 A,180 A,250 A,400 A,500 A,1000 A(50 Hz, 60 Hz)
AC power (measurement devices) Greater than or equal to 0 W and less than or equal to 4 kW
(100 V, 200 V Greater than or equal to 1 mA and less than or equal to 5 A, 8 A, 10 A, 20 A 50 Hz, 60 Hz, 400 Hz, 1 kHz Power factor: 0 (lag) to 1 to 0 (lead) 400 Hz and 1 kHz: power factor of 1 only)
Watt-hour meters Greater than or equal to 0 Wh and less than or equal to 0.6667 kWh
(100 V, 200 V Greater than or equal to 1 mA and less than or equal to 5 A, 8 A, 10 A, 20 A 50 Hz, 60 Hz Power factor: 0 (lag) to 1 to 0 (lead) Integration time: 600 s)
Frequency measuring instruments Greater than or equal to 0.5 Hz and less than or equal to 500 kHz (square wave, 4 VP-p to 10 Vp-p)
Greater than or equal to 1 Hz and less than or equal to 500 kHz (sine wave, 10 Vp-p)
Time interval measuring instruments 10 s
Contact thermometers (thermometers with indicators) -40 ℃ ~ 600 ℃

 

Inquiries about repair and calibration

To make an inquiry, click the “JSCC Calibration Inquiries” button below

 

JSCC Calibration Inquiries

Translate »