POWER SUPPLY 3272

POWER SUPPLY 3272

Power Supply Unit for Outputting Current Probe Signals to Memory HiCorders and Oscilloscopes

SKU: 3272 Category:

Model No. (Order Code)

3272 For the CT6700s/3270s, up to 1

Note: These products cannot be used alone. To measure current, a compatible current sensor is required.

CE

 

Description

Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The 3272 is a single channel power supply for outputting signals measured by the 327X Series AC/DC Clamp On Probe to the data acquisition equipment.

Key Features

• Power supply for the Clamp on probe 3273-50 - 3276, CT6700 series
• Supplies power when connected to a general-purpose instrument such as a recorder.

 

 

Basic specifications

Compatible sensors Model CT6700, CT6701: up to 2 units
Model 3273-50, 3274, 3275 or 3276: up to 1 unit
Note: May be used with up to 2 units of Model 3273 (not -50 type), and up to 2 units of Models 3273-50, 3274, 3275 or 3276 on condition that the measurement current is sufficiently low.
Number of power supply connectors 2
Output ±12 V ±0.5 V, 600 mA
(sum total of all channels)
Power supply 100 V or 120/ 220/ 240 V AC (specify when ordering), 50/60 Hz 20 VA max.
Dimensions and mass 73 mm (2.87 in)W × 110 mm (4.33 in)H × 186 mm (7.32 in)D, 1.1 kg (38.8 oz)
Accessories Power cord ×1, Instruction manual ×1, Spare fuse ×1

Catalogs

Catalog: CURRENT PROBE series CT6700, CT6701, 3273-50, 3274, 3275, 3276

Declaration of Conformity

POWER SUPPLY 3272 [101KB]

There is no product options available for this product.

There are no drivers, firmware or software available for this product.

Translate »