Home/Electrometers Picoammeters/POWER SOURCE UNIT SM7860-02/-22


16-channel Power Source Unit for the SM7810 Super Megohm Meter to Improve MLCC Testing Efficiency

SKU: SM7860-02/-22 Category:

Model No. (Order Code)

SM7860-02 100V AC power supply
SM7860-22 220V AC power supply

Note: The Power Source Unit SM7860 is produced to order. An output terminal connection cable*2 is required separately. Please contact your local HIOKI representative, or if you need to use a power supply voltage other than 100VAC or 220VAC. *2 Output terminal cable •Voltage output terminal connection cables are available in various lengths to suit HIOKI measurement systems. Please consult with your HIOKI representative.

Not CE



The SM7860 series allows for setting the dual-line output voltage on 8 channels or 16 channels, and enables up to 32-channel of output. The Hioki SM7860-02/-22 is a 16-channel, 1000V power source for the Hioki SM7810 Super Megohm Meter, providing positive and negative polarities required for MLCC test lines.

Key Features
• Support for multi-channel systems up to 32-channel output
• 8-channels or 16-channels dual-line output voltage setting
• Positive and negative polarities required for the MLCC test line included in a single unit
• Output ON/OFF and current limitation can be performed for each channel
• Support for the discharge of the charge capacitor
• Output voltage of 1 kV is available
• Large current output of 50 mA */channel allows for reducing the number of backup charges
* Output voltage of 1 kV is limited to 10 mA/channel

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Supported device Super MΩ HiTester SM7810
Object to which voltage is applied: MLCC (the Multilayer Ceramic Capacitor)
Generation accuracy Output voltage accuracy: ±2% of set value ± 0.5 V (with no load)
Inter-channel error: ± 0.01 V or less (between outputs on the same line with no load)
Interfaces GP-IB, RS-232C, EXT I/O
Power supply SM7860-01 to -07: 100 V AC, SM7860-21 to -27: 220 V AC, 50/60 Hz, 860 VA
Dimensions and mass 425 mm (16.73 in) W × 249 mm (9.80 in) H × 581 mm (22.87 in) D, 45 kg (1587.3 oz)
[SM7860-07 / -27] : 32 kg (1128.7 oz)
Accessories Power cable ×1, Instruction manual ×1, Voltage output connector L2221 ×4 [SM7860-01, 02, 21, 22] : ×2

Functions & output channel configuration*1 The resolution of the output voltage range is 0.1 V. *2 Only when the operating conditions as stated in the restriction warnings of the specifications are met.

OUT1 output content +1 kV
OUT3 output content -1 kV
Overview (Total number of channels and output voltage) 16 ch
±1000 V
Line A Number of OUT1 channels 8 ch
Line A OUT1 output voltage range *1 250.0 V to 1000.0 V
Line A Current limitation ±10 mA/ch
Line A Maximum output current *2 100 mA (100 VA)
Line B Number of OUT3 channels 8 ch
Line B OUT3 output voltage range *1 -250.0 V to -1000.0 V
Line B Current limitation ±10 mA/ch
Line B Maximum output current *2 100 mA (100 VA)




Bundled Accessories



Voltage output connector for SM7860

Measure the Leakage Current of a Multilayer Ceramic Capacitor (MLCC) in High Speeds 

There are no drivers, firmware or software available for this product.

Translate »