POWER HiTESTER 3193-10

Home/Power Analyzers/POWER HiTESTER 3193-10

POWER HiTESTER 3193-10

DC, 0.5 Hz To 1 MHz, 6-Channel 3-Phase 4-Wire Power Meter with Direct and Clamp Sensor Input

Model No. (Order Code)

3193-10 main unit only, FDD less

Note: Main unit 3193-10 cannot operate alone - please purchase an input unit Model 9600 to 9605 for factory installation prior to shipment. All subsequent input unit replacements or expansions must be conducted at HIOKI for an additional service charge.

CE
GPIB
TrueRMS
RS232C

 

Description

Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3193-10 is a 6-channel power meter for testing any type of circuit ranging from single-phase lines to three-phase four-wire lines. Based on the voltage, current, and active power measurements, the power meter calculates and displays reactive power, apparent power, power factor, phase angle, and efficiency. It also provides a wide range of measurement functions including frequency measurement function, peak measurement function, current integration, active power integration, analog outputs, monitor outputs.

 

 

Key Features

• A rich assortment of measurement functions including voltage, current, power, waveform peak value and efficiency
• High-precision with basic accuracy of ±0.2 %, high-speed response of 0.1 s
• Measure up to six circuits simultaneously
• Select from 3 types of input units

 

 

Basic specifications (Accuracy guaranteed for 6 months, Post-adjustment accuracy guaranteed for 6 months)

Measurement lines Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems
Measurement items [Using the optional 9600, 9601, 9602]
Voltage, current, voltage/current peak, active power, reactive power, apparent power, power factor, phase angle, frequency, current integration, power integration, load rate, efficiency
  [Using the optional 9603, added function]
Voltage, torque, rotation, frequency, motor output
  [Using the optional 9605, added function]
Harmonic measurement, waveform, voltage fluctuation / flicker measurement function
Measurement range (using the 9600) [Voltage] 6/ 15/ 30/ 60/ 150/ 300/ 600/ 1000 V
[Current] 200/ 500 mA, 1/ 2/ 5/ 10/ 20/ 50 A
[Power] 1.2 W to 150 kW
(Depends on measurement mode and combination of voltage and current range)
[Frequency] 50/ 500/ 5 k/ 50 k/ 2 MHz
Basic accuracy (Active power) ±0.1 % rdg. ±0.1 % f.s. (45 Hz to 66 Hz, using the 9600)
Display refresh rate 8 times /s
Frequency characteristics [Using the 9600] DC, 0.5 Hz to 1 MHz
[Using the 9601] 5 Hz to 100 kHz
[Using the 9602] DC, 0.5 Hz to 200 kHz
Functions Waveform peak measurement, Efficiency measurement, D/A output, External control, Scaling, Averaging, Back up function, PM measurement at motor output (using the optional 9603), etc,.
Interfaces RS-232C, GP-IB standard
Power supply 100/ 120/ 200/ 230 V AC, switched automatically, 50/60 Hz, 150 VA max.
Dimensions and mass 430 mm (16.93 in) W × 150 mm (5.91 in) H × 370 mm (14.57 in) D, 15 kg (529.1 oz) (at options installed)
Accessories Instruction manual ×1, Power cord ×1, Connector ×1

Catalogs

POWER HiTESTER 3193-10

Declaration of Conformity

POWER HiTESTER 3193-10 [101KB]

Options

Factory installed options

 

AC/DC DIRECT INPUT UNIT 9600

6 V to 1 kV, 200 mA to 50 A

AC DIRECT INPUT UNIT 9601

60 V to 1 kV, 200 mA to 50 A

AC/DC CLAMP INPUT UNIT 9602

6 V to 600 V, 500 mA to 500 A, * Depends on clamp on sensor in use

EXTERNAL SIGNAL INPUT UNIT 9603

For the 3193, 3193-10 only, Pulse, DC voltage input, 2 channels input

HARMONIC/FLICKER MEASUREMENTS UNIT 9605

For the 3193, 3193-10 only, Harmonic analysis up to 50th order, instant flicker value display or other monitoring, to be installed in Model 3193/3193-10, not CE Marked

Option A

The CT9901 is for connecting the PW9100 to the 3390

 

CONVERSION CABLE CT9901

ME15W (12 pin) to PL23 (10 pin) connector

PC communication

 

RS-232C CABLE 9638

For the PC, 9 pins - 25 pins, cross, 1.8m (5.91 ft) length

RS-232C CABLE 9637

For the PC, 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length

GP-IB CONNECTOR CABLE 9151-02

2 m (6.56 ft) length

Printer options

*PRINTER UNIT is a built-in option that must be specified upon order.

 

RECORDING PAPER 9232

For the Printer option 9604, 74 mm (2.91 in) × 10 m (32.81 ft), 10 rolls/set

Up to 1000 A (High precision)

 

AC/DC CURRENT SENSOR CT6865

• DC to 20kHz • Phase: DC to 1kHz • Rated 1000A • 2V/1000A output • φ 36 mm (1.42 in) core dia.

AC/DC CURRENT SENSOR 9709

• DC to 100kHz • Phase: DC to 100kHz • Rated 500A • 2V/500A output • φ 36 mm (1.42 in) core dia.

AC/DC CURRENT PROBE CT6845

• DC to 100 kHz • 500 A AC/DC rated • 4 mV/A output • φ 50 mm (1.79 in) core dia.

AC/DC CURRENT PROBE CT6844

• DC to 200 kHz • 500 A AC/DC rated • 4 mV/A output • φ 20 mm (0.79 in) core dia.

AC/DC CURRENT PROBE CT6846

• DC to 20 kHz • 1000 A AC/DC rated • 2 mV/A output • φ 50 mm (1.79 in) core dia.

Up to 200 A (High precision)

 

AC/DC CURRENT SENSOR CT6862

• DC to 1MHz, Phase: DC to 300kHz • Rated 50A • 2V/50 A output • φ 24 mm (0.94 in) core dia.

AC/DC CURRENT SENSOR CT6863

• DC to 500 kHz, Phase: DC to 300kHz • Rated 200A • 2V/200A output • φ 24 mm (0.94 in) core dia.

AC/DC CURRENT PROBE CT6841

• Frequency characteristics DC to 1 MHz, 20A AC/DC rated, 0.1 V/A output • φ 20 mm (0.79 in) core dia.

AC/DC CURRENT PROBE CT6843

• Frequency characteristics DC to 500 kHz, 200A AC/DC rated, 0.01 V/A output • φ 20 mm (0.79 in) core dia.

CLAMP ON SENSOR 9272

• 1Hz to 100kHz • Phase: 5Hz to 50kHz • Rated 20A or 200A • 2V/20A, 2V/200A output • φ 46 mm (1.81 in) core dia.

Voltage Input

 

VOLTAGE CORD L9438-50

1000 V specifications, Black/ Red, 3 m (9.84 ft) length, Alligator clip ×2

Voltage measurement

*PW9020 ×4 pieces are bundled, additional single sensors also available

 

MAGNETIC ADAPTER 9804

Attaches to the tip of the L9438s or other voltage cord, red/black set

There are no drivers, firmware or software available for this product.

Translate »