LOGIC PROBE MR9321,MR9321-01

Home/Data Acquisition Oscilloscopes/LOGIC PROBE MR9321,MR9321-01

LOGIC PROBE MR9321,MR9321-01

Detect AC/DC voltage with Memory HiCorders

SKU: MR9321,MR9321-01 Category:

Model No. (Order Code)

MR9321 For the Memory HiCorder, large terminal type
MR9321-01 For the Memory HiCorder, miniature terminal type

Note: Caution for terminal size connectiong to a Memory HiCorder




•4 isolated channels
•ON/OFF detection of 100V/200V AC voltage, or 24V DC
•Detection of voltage interruption for power line
•High speed response of rise time 1ms, fall time 3ms
•Connection with a Memory HiCorder, miniature terminal type the MR9321-01, large terminal type the MR9320

Basic specificationsNote: The unit-side plug of the MR9321-01 is different from the MR9321.

Function Detection of AC or DC relay drive signal for High/Low state recording
Can also be used for power line interruption detection
Input 4 channels (isolated between unit and channels), HIGH/LOW range switching
Input resistance: 100 kΩ or higher (HIGH range), 30 kΩ or higher (LOW range)
Output (H) detection 170 to 250 V AC, ±DC 70 to 250 V (HIGH range)
60 to 150 V AC, ±DC 20 to 150 V (LOW range)
Output (L) detection 0 to 30 V AC, ±DC 0 to 43 V (HIGH range)
0 to 10 V AC, ±DC 0 to 15 V (LOW range)
Response time Rising edge 1 ms max., falling edge 3 ms max. (with HIGH range at 200 V DC, LOW range at 100 V DC)
Max. allowable input 250 Vrms (HIGH range), 150 Vrms (LOW range) (the maximum voltage that can be applied across input pins without damage)
Dimensions and mass 62 mm (2.44 in)W × 128 mm (5.04 in)H × 20 mm (0.79 in)D, MR9321-01: 300 g (10.6 oz), MR9321: 320 g (11.3 oz), Main unit cable 1.5 m (4.92 ft), input section cable 1 m (3.28 ft)
Accessories Carrying case ×1, Instruction Manual ×1

There is no product options available for this product.

There are no drivers, firmware or software available for this product.

Translate »