5A Voltage Output Sensor for Current Load Measurements
CLAMP ON SENSOR 9694
Model No. (Order Code)
|9694||For the PW3198 or other|
Hioki current sensors are best-in-class devices for use with power meters, PQAs and Memory HiCorders. The 9694 is 5A AC clamp sensors with voltage output for measuring load current.
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)Note: In addition to the Power Quality Analyzer, can also be used as a current sensor with HIOKI's power meter and voltage input recorders.
|Rated input current||AC 5 A|
|Rated output voltage||AC 50 mV f.s. (AC 10 mV/A)|
|Amplitude accuracy||±0.3% rdg. ±0.02% f.s. (45 to 66 Hz, f.s. = rated primary current)|
|Phase accuracy||±2 ° (at 45 - 5 kHz)|
|Max. allowable input||Continuous 50 A rms (at 45 - 66 Hz)|
|Frequency characteristic||40 Hz to 5 kHz: ±1 % or less (deviation from accuracy)|
|Max. rated voltage to earth||300 V AC rms (insulated wire)|
|Core diameter||φ 15 mm (0.59 in)|
|Dimensions and mass||46 mm (1.81 in) W × 135 mm (5.31 in) H × 21 mm (0.83 in) D, 230 g (8.1 oz), cord length 3 m (9.84 ft)|
Declaration of Conformity
CLAMP ON SENSOR 9694 [121KB]
Evaluate Data Center Infrastructure Efficiency and Power Usage Effectiveness
Measure the High-Order Harmonic Voltage and Current of Power Lines
Power Quality Survey of Solar Power Generation Systems
There are no drivers, firmware or software available for this product.