CLAMP ON SENSOR 9661

CLAMP ON SENSOR 9661

500A Voltage Output Sensor for Current Load Measurements

SKU: 9661 Category:

Model No. (Order Code)

9661 500 A AC, for the 3196 or other

Note: Supports power quality analyzers, power meters and other data acquisition equipment with voltage input

CE

 

Description

Hioki current sensors are best-in-class devices for use with power meters, PQAs and Memory HiCorders. The 9661 is a 500A AC voltage output clamp sensor for measuring large load current.

 

 

Key Features

• For inverter equipment or commercial power lines
• Measure up to 500A AC continuously

 

 

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)Note: In addition to the Power Quality Analyzer, can also be used as a current sensor with HIOKI's power meter and voltage input recorders.

Rated primary current AC 500 A
Output voltage AC 500 mV f.s. (AC 1 mV/A)
Amplitude accuracy ±0.3 % rdg. ±0.01 % f.s. (45 - 66 Hz, f.s.= rated primary current)
Phase accuracy ±0.5 ° (at 45 Hz - 5 kHz)
Max. allowable input Continuous 550 A rms (at 45 - 66 Hz)
Frequency characteristics 40 Hz to 5 kHz: ± 1.0%
(deviation from accuracy)
Max. rated voltage to earth AC 600 V rms (insulated wire)
Core diameter φ 46 mm (1.81 inch)
Dimensions and mass 77 mm (3.03 in) W × 151 mm (5.94 in) H × 42 mm (1.65 in) D, 380 g (13.4 oz), cord length 3 m (9.84 ft)

Declaration of Conformity

CLAMP ON SENSOR 9661 [121KB]

Options

Save Energy by Eliminating Waste from Lighting 

Saving Energy by Reviewing Air Conditioning Settings 

Reviewing PC Standby Power to Save Energy 

Checking the Amount of Electricity Sold in Photovoltaic (PV) Systems 

Evaluate Data Center Infrastructure Efficiency and Power Usage Effectiveness 

Measure the High-Order Harmonic Voltage and Current of Power Lines 

Power Quality Survey of Solar Power Generation Systems 

There are no drivers, firmware or software available for this product.

Translate »