C METER 3506-10

C METER 3506-10

Dual-band 1kHz/1MHz Capacitance Meter for High Speed Testing of Ceramic Capacitors on Production Lines

Model No. (Order Code)

3506-10

Note: This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C cable 9637 without hardware flow control.

CE
GPIB
RS232C

 

Description

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3506-10 is a dual-band capacitance meter designed to be integrated with automatic taping machines and sorters for production of MLCC (multi-layer ceramic capacitors).

 

 

Key Features

• High-speed analog test time of 0.6 ms (at 1 MHz)
• Improved noise resistance and enhanced repeatability in measurement precision even for production lines
• 1 kHz and 1 MHz measurement frequency supports stable low capacitance testing with taping machines
• BIN function, for easy component screening

 

 

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Measurement parameters C (Capacitance), D (loss coefficient, tan δ), Q (1/tan δ)
Measurement range C: 0.001 fF to 15.0000 μF, D: 0.00001 to 1.99999, Q: 0.0 to 19999.9
Basic accuracy (Typ.) C: ±0.14 % rdg., D: ±0.0013
Measurement frequency 1 kHz, 1 MHz
Measurement signal level 500 mV, 1 V rms
Output impedance 1 Ω (at 1 kHz in 2.2 μF and higher ranges), 20 Ω (in ranges other than the above)
Display LED (six digits, full scale count depends on measurement range)
Measurement time 1.5 ms: 1 MHz, 2.0 ms: 1 kHz
Functions BIN (measurement values can be classified by rank), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, Current detection circuit monitoring, Applied voltage value monitoring, EXT. I/O, RS-232C, GP-IB
Power supply Selectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz 40 VA max.
Dimensions and mass 260 mm (10.24 in) W × 100 mm (3.94 in) H × 298 mm (11.73 in) D, 4.8 kg (169.3 oz)
Accessories Power cord × 1, Instruction manual × 1, Spare fuse × 1

Catalogs

C METER 3506-10, C HiTESTER 3504

SMD TEST FIXTURE IM9110

User Guides

LCR Application Guide

Declaration of Conformity

C METER 3506-10 [100KB]

Options

PC communication

 

GP-IB CONNECTOR CABLE 9151-02

2 m (6.56 ft) length

Printer options

*PRINTER UNIT is a built-in option that must be specified upon order.

 

AC ADAPTER 9443-02

For the Printer 9442, EU type

PRINTER 9442

For printing numerical values 112 mm (4.41 in) paper width, not CE marked

RECORDING PAPER 1196

For the Printer 9442, 112 mm (4.41 in) × 25 m (82.03 ft), 10 rolls/set

CONNECTION CABLE 9444

9 pin - 9 pin straight, 1.5 m (4.92 ft) length

Probe and Test fixtures

 

SMD TEST FIXTURE IM9110

• Direct connection two-terminal measurement type • DC to 1 MHz • Measurable sample sizes: 008004 (EIA)

PINCHER PROBE L2001

Cable length 73 cm (2.40 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, tip electrode spacing: 0.3 (0.01 in) to 6 mm (0.24 in)

4-TERMINAL PROBE L2000

Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)

CONTACT TIPS IM9902

To replace the tip on the L2001, small size

CONTACT TIPS IM9901

To replace the tip on the L2001, regular size, bundled with the L2001

SMD TEST FIXTURE 9699

Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high

SMD TEST FIXTURE 9677

Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)

4-TERMINAL PROBE 9500-10

Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, measurable conductor diameter: φ0.3 mm (0.01 in) to 2 mm (0.08 in)

SMD TEST FIXTURE 9263

Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)

TEST FIXTURE 9262

Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)

TEST FIXTURE 9261-10

Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 1.5 mm (0.06 in)

4-TERMINAL PROBE 9140-10

Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)

SMD TEST FIXTURE IM9100

• Direct connection type • SMDs with electrodes on the bottom • DC to 8MHz • Measurable sample sizes: 01005 to 0402 (EIA)

There are no drivers, firmware or software available for this product.

Translate »