fbpx

C HiTESTER 3504

C HiTESTER 3504

Dual-band 120Hz/1kHz Capacitance Meter for High Speed Inspection of Multi-Layer Ceramic Capacitors (MLCC) on Taping Machines

Model No. (Order Code)

3504-40 with RS-232C interface
3504-50 with GP-IB, RS-232C
3504-60 with GP-IB, RS-232C

Note: This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.

CE
GPIB
RS232C

 

Description

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3504 series are dual-band capacitance meters suited for large-capacitance MLCC inspections using a constant voltage.

 

 

Key Features

• High speed measurement of 2ms
• Supports C measurements with voltage dependency characteristics through the use of constant voltage testing (CV)
• Model 3504-60 can detect contact failure on all 4 terminals for increased reliability
• BIN function on the 3504-60/-50 is ideal for sorting machines
• Model 3504-40 offers high speed and affordability, perfect for integrating into taping machines
• In all models, contact error is constantly monitored during measurement, contributing to increased yield

 

 

Basic specifications (Accuracy guaranteed for 6 months, Post-adjustment accuracy guaranteed for 6 months)

Measurement parameters C (capacitance), D (loss coefficient tan δ)
Measurement range C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99000
Basic accuracy (Typ.) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016
Measurement frequency 120 Hz, 1 kHz
Measurement signal level 100 mV (3504-60 only), 500 mV, 1 V rms
CV 100 mV Measurement range: up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz)
CV 500 mV Measurement range : up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz)
CV 1V Measurement range : up to 70 μF range (Source frequency 1 kHz), up to 700 μF range (Source frequency 120 Hz)
Output impedance 5Ω (In open terminal voltage mode outside of the CV measurement range)
Display LED (six digits, full scale count depends on measurement range)
Measurement time 2 ms (Typ. value. Depends on measurement configuration settings)
Functions 4-terminal contact check function (3504-60 only)
BIN (measurement values can be classified by rank) (3504-50, 3504-60), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, EXT. I/O, RS-232C (all models standard), GP-IB (3504-50, 3504-60)
Power supply Selectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz, 110 VA max.
Dimensions and mass 260 mm (10.24 in) W × 100 mm (3.94 in) H × 220 mm (8.66 in) D, 3.8 kg(134.0 oz)
Accessories Power cord ×1, Instruction manual ×1, Spare fuse ×1

Catalogs

C METER 3506-10, C HiTESTER 3504

User Guides

LCR Application Guide

Declaration of Conformity

C HiTESTER 3504-40,3504-50,3504-60 [100KB]

Options

PC communication

 

GP-IB CONNECTOR CABLE 9151-02

2 m (6.56 ft) length

Printer options

*PRINTER UNIT is a built-in option that must be specified upon order.

 

CONNECTION CABLE 9444

9 pin - 9 pin straight, 1.5 m (4.92 ft) length

AC ADAPTER 9443-02

For the Printer 9442, EU type

PRINTER 9442

For printing numerical values 112 mm (4.41 in) paper width, not CE marked

RECORDING PAPER 1196

For the Printer 9442, 112 mm (4.41 in) × 25 m (82.03 ft), 10 rolls/set

Probe and Test fixtures

 

4-TERMINAL PROBE 9140

DC to 100 kHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω

PINCHER PROBE L2001

Cable length 73 cm (2.40 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, tip electrode spacing: 0.3 (0.01 in) to 6 mm (0.24 in)

CONTACT TIPS IM9902

To replace the tip on the L2001, small size

CONTACT TIPS IM9901

To replace the tip on the L2001, regular size, bundled with the L2001

SMD TEST FIXTURE 9699

Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high

SMD TEST FIXTURE 9677

Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)

SMD TEST FIXTURE 9263

Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)

TEST FIXTURE 9262

Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)

TEST FIXTURE 9261

DC to 8 MHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω

There are no drivers, firmware or software available for this product.

Translate »