BATTERY HiTESTER 3561

BATTERY HiTESTER 3561

Battery Tester for High-Speed Production Line Testing of Small Battery Packs for Mobile Devices

SKU: 3561 Category:

Model No. (Order Code)

3561 basic model
3561-01 with GP-IB interface

Note: Measurement leads are not included. Purchase the appropriate lead option for your application separately. The male (system side) of the EXT I/O connector is also available. Please inquire with your Hioki distributor.

CE
GPIB
RS232C

 

Description

Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The 3561 is a wide range 300 mΩ to 3Ω/20V DC battery internal resistance tester for high-speed production line testing of small secondary batteries.

 

 

Key Features

• High-speed testing for production lines of small battery packs for mobile and portable communications devices
• Measure internal resistance and battery voltage
• For process control such as in high-speed automated assembly lines
Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user

 

 

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Max. applied measurement voltage ±22 V DC
±70 V DC maximum rated voltage above ground
Resistance measurement ranges 300 mΩ (Max. display 310.00 mΩ, resolution 10 μΩ) to 3 Ω (Max. display 3.1000 Ω, resolution 100 μΩ), 2 ranges
Accuracy: ±0.5 % rdg. ±5 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM)
Testing source frequency: 1 kHz ±0.2 Hz, testing current: 10 mA (300 mΩ range), 1 mA (3 Ω range)
Open-circut Voltage: 7 V peak
Voltage measurement ranges DC 20 V, resolution 0.1 mV, Accuracy: ±0.01 % rdg. ±3 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM)
Display 31000 full digits (resistance), 199999 full digits (voltage), LED
Sampling rate Four steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow)
(Typ., sampling time depends on supply frequency settings and function.)
Measurement time Response time + sampling rate, approx. 3 ms for measurements
(Response time depends on reference values and the measurement object.)
Comparator functions Judgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.)
Interfaces External I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only)
Power supply 100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions and mass 215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)
Accessories Instruction manual × 1, Power cord × 1

Catalogs

BATTERY HiTESTER BT3563, BT3562, 3561

Declaration of Conformity

BATTERY HiTESTER 3561,3561-01 [43KB]

Options

Measurement Probes

*The L2107, Z2002 are bundled with the RM3548

 

FOUR TERMINAL LEAD 9453

A:280 mm (11.02 in), B:118 mm (4.65 in), L:1360 mm (4.46 ft), 60V DC

ZERO ADJUSTMENT BOARD 9454

For the L2100, 9465-10, 9465, 9461

LARGE CLIP TYPE LEAD 9467

A:300 mm (11.81 in), B:116 mm (4.57 in), L:1360 mm (4.46 ft), 50V DC

CLIP TYPE LEAD L2107

A:130 mm (5.12 in), B:83 mm (3.27 in), L:1100 mm (3.61 ft), 70 VDC

PC communication

 

GP-IB CONNECTOR CABLE 9151-02

2 m (6.56 ft) length

RS-232C CABLE 9637

For the PC, 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length

RS-232C CABLE 9638

For the PC, 9 pins - 25 pins, cross, 1.8m (5.91 ft) length

Drivers, Firmware, Software

Translate »