BARE BOARD TESTER FA1232

Home/Automatic Test Equipment/BARE BOARD TESTER FA1232

BARE BOARD TESTER FA1232

Robust Support for Testing Device Embedded Substrates

SKU: FA1232 Category:

Model No. (Order Code)

FA1232-61

 

Description

The FA1232 is a bare board tester that utilizes the full range of Hioki’s in-circuit testing technologies to deliver extensive range of tests, from high-density FC-CSP boards with active and passive embedded devices.

Key Features

• Support for an extensive range of tests, from high-density FC-CSP boards to device embedded
• Multichannel test point configuration with 8,192 channels each for the upper and lower fixtures
• Test performance that is fast, highly precise, and highly reliable
High-speed measurement with parallel measurement
High-speed movement due to a combination of a lightweight unit and test head
• Jig replacement with the touch of a button
• Additional convenience with genuine HIOKI fixtures thanks to the RFID function

 

 

Specifications Overview

Maximum number of test points 16,384 (8,192 top, 8,192 bottom)
Maximum number of test steps 10,000 steps
Minimum pad diameter φ 20 μm
Supported range of board sizes for clamping and transport Thickness: 0.1 to 2.5 mm (0.10 in) ; Dimensions: 45 mm (1.77 in)W × 50 mm (1.97 in)D to 50 mm (1.97 in) × 305 mm (12.01 in)D
Thickness: 0.3 mm (0.01 in) to 2.5 mm (0.10 in) ; Dimensions: 45 mm (1.77 in)W × 50 mm (1.97 in)D to 170 mm (6.69 in)W × 305 mm (12.01 in)D
Measurement units High-speed measurement unit
Power supply 200/220 V AC (3-phase, 3-wire), 50/60 Hz depending on location of use (please specify upon order)
Power consumption: 5.2 kVA
Dimensions and mass 1,795 mm (70.67 in)W × 1,740 mm (68.50 in)H × 2,300 mm (2300 in)D, 2,500 kg (88 183.4 oz)

Handling System FA1882-60 Specifications

Power supply 200/220 V AC (3-phase, 3-wire), 50/60 Hz depending on location of use (please specify upon order)
Power consumption: 2.0 kVA
Board storage Stacked in stockers (untested, PASS, FAIL)
4 categories (untested, PASS, OPEN/UNTESTED = FAIL 1, SHORT/SHORT+OPEN = FAIL 2)
Cycle time Approx. 8.5 sec.
Board dimensions Thickness: 0.3 mm (0.01 in) to 2.5 mm (0.10 in)
Dimensions: 45mm (1.7 in) × 50 mm (1.97 in) to 170 mm (6.69 in)× 305 mm (12.01 in)
Dimensions and mass 1,950 mm (76.77 in)W × 1,685 mm (65.79 in)H × 1,150 mm (45.28 in)D (excluding handles and other protruding parts), 800 kg (28 218.7 oz)

There is no product options available for this product.

There are no drivers, firmware or software available for this product.

Translate »