fbpx

ARBITRARY WAVEFORM GENERATOR UNIT U8793

Home/Data Acquisition Oscilloscopes, Signal Generators/ARBITRARY WAVEFORM GENERATOR UNIT U8793

ARBITRARY WAVEFORM GENERATOR UNIT U8793

Pair with Memory Recorders to Achieve a Single-device Solution for Waveform Recording and Generation

Model No. (Order Code)

U8793 For the MR8847A or other

Note: Use with Hioki Memory Hicorders. *Output cords are not included. Please purchase them seperately.

CE

 

Description

The Arbitrary Waveform Generator Unit U8793 is a plug-and-play module for the Hioki Memory HiCorder to create a function generator, arbitrary waveform generator, and waveform measurement in a single device.   Easily observe waveforms while varying test conditions, such as changing the signal's amplitude and frequency as well as programming various waveforms to output in order.

Key Features
• Output arbitrary waveform signals up to 2 channels
• Output problematic waveforms recorded with the Memory Hicorder up to 15 V
• Output customized arbitrary waveforms signals up to 15 V
• For use with Hioki Memory Hicorder series (cannot use with 8847 or MR8847)
• Built-in function generator and sweep function
• Isolated between unit and output, and between all channels

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Output terminal Number of channels: 2, SMB terminal (Output impedance: 1 Ω or less)
Max. rated voltage to ground: 33 V rms AC or 70 V DC
Output voltage range -10 V to 15 V (Amplitude setting range: 0 V to 20 V p-p, Setting resolution: 1 mV)
Max. output current 10 mA (Allowable load resistance: 1.5 kΩ or more)
Function generator DC, Sine wave, Square wave, Pulse wave, Triangular wave, Ramp wave, Output frequency: 0 Hz to 100 kHz
Arbitrary waveform generator mode Waveforms measured by MR8847A, etc., generated by Hioki Model 7075, PW3198, or SF8000, CSV waveforms
D/A refresh rate: 2 MHz (using 16-bit D/A)
Sweep function Frequency, Amplitude, Offset, Duty (Pulse only)
Program function Max. 128 steps (Number of loops for each step, Number of total loops)
Other Self-test function (Voltage), External input/output control
Dimensions and mass 106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 250 g (8.8 oz)
Accessories None

Catalogs

Waveform Generator System U8793,MR8847A

Technical Notes

Arbitrary Waveform Generator Unit U8793, Waveform Generator Unit MR8790, and Pulse Generator Unit MR8791

Options

Output cables

* Please contact your local HIOKI distributor for connectors that support Model MR8791.

 

CONNECTION CABLE L9795-01

SMB to alligator clip, 1.5 m (4.92 ft) length

CONNECTION CABLE L9795-02

SMB to BNC terminal, 1.5 m (4.92 ft) length

Use with these Products

*Cannot use with 8847 or MR8847

 

MEMORY HiCORDER MR8847A

• Max. 16ch Analog + 16ch Logic • Max. 10ch Analog + 64ch Logic • 20M-Sampling/s • 32M to 256M-Word Memory (2ch) • Waveform judgment function • 12-bit/16-bit A/D resolution • USB, HD, CF-card

MEMORY HiCORDER MR8827

• Max. 32ch Analog + 32ch Logic • Max. 28ch Analog + 64ch Logic • 20M-Sampling/s • 16M to 128M-Word Memory (4ch) • 12-bit/16-bit/24-bit A/D resolution • USB, SSD, CF-card

MEMORY HiCORDER MR8740, MR8741

• Max. 54ch/16ch Analog + 16ch Logic • 20M-Sampling/s • 12-bit/16-bit A/D resolution

There are no drivers, firmware or software available for this product.

Translate »