fbpx

AC CLAMP METER 3280-10F

Home/Clamp Meters/AC CLAMP METER 3280-10F

AC CLAMP METER 3280-10F

AC Current Clamp Meter with Broad Operating Temperature Range, Attachable Flexible Sensor, and Drop-Proof Durability

SKU: 3280-10F Category:

Model No. (Order Code)

3280-10F Average rectified
3280-70F 3280-10F, CT6280 bundled model

Note: The 3280-70F includes both the meter and an AC Flexible Current Sensor. 1: AC CLAMP METER 3280-10F×1 2: AC FLEXIBLE CURRENT SENSOR CT6280×1 3: CARRYING CASE C0205×1

CE
Guarantee 3 Years
DROP PROOF

 

Description

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’ s expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots.

Key Features
• Measure the fundamental waveform component using the average rectified method
• Expanded -25 °C to 65 °C operating temperature range
• Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
• Drop proof design withstands drop from a height of 1 meter

CAT IV 300 V (Current)
CAT III 600 V (Current)
CAT III 300 V (Voltage)
CAT II 600 V (Voltage)

 

 

Using 3280 series AC clamp meters: Introduction to functionality and measurement methods

In addition to AC current measurement, these clamp meters provide voltage and resistance measurement as well as continuity check functionality.
Their compact size, low-profile design, and resistance to both rough handling and extreme temperatures make them essential tools for any electrician.

 

 

Using 3280 series AC clamp meters: Difference between mean value and true RMS measurement

Measurements taken with the Hioki 3280-10F (which uses the mean value method) and the the Hioki 3280-20F (which uses the true RMS method) are compared.
Observe the difference between readings from these two types of instruments when measuring a distorted waveform that contains harmonic components such as those produced by inverters and switching power supplies.

 

 

A pocket clamp meter that can use flexible sensors

When connected to an optional flexible current sensor, the 3280-10F can be used to measure the current flowing in pairs of wires or in tangled or complexly routed wires around which it was not possible to apply a clamp-on sensor in the past.

 

 

Essential for electrical work: A thin card tester that fits in the pocket with all the capabilities of a clamp meter

The 3280-10F delivers all the functionality of a clamp meter and card tester in the form factor of the latter. In addition to current measurement, this single instrument delivers voltage measurement, continuity check, and resistance measurement functionality.

 

 

A tough, pocket-size clamp meter with an operating temperature range of -25°C to 65°C

The 3280-10F inherits the drop-proof durability of the previous 3280-10 (making it able to withstand being dropped onto concrete from a height of 1 m) and expands that instrument’s operating temperature range to -25°C to 65°C (from the previous 0°C to 40°C). As a result, it can be used in even harsher environments.

 

 

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

AC Current 41.99 to 1000 A, 3 ranges (50 to 60 Hz, Average rectified),
Basic accuracy: ±1.5 % rdg. ±5 dgt.
DC Voltage 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage 4.199 V to 600 V, 4 ranges (45 to 500 Hz, Average rectified),
Basic accuracy: ±1.8 % rdg. ±7 dgt.
Crest factor N/A
Resistance 419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt.
Other functions Continuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter
Display LCD, max. 4199 dgt., Display refresh rate: 400 ms
Environmental protection IP40 dustproof and waterproof
Power supply Coin type lithium battery (CR2032) ×1, Continuous use 120 hours
Core jaw dia. φ 33 mm (1.30 in)
Dimensions and mass 57 mm (2.24 in) W × 175 mm (6.89 in) H × 16 mm (0.63 in) D, 100 g (3.5 oz)
Accessories CARRYING CASE 9398 ×1, TEST LEAD L9208 ×1, Coin type lithium battery (CR2032) ×1, Instruction manual ×1

CT6280 Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Core jaw dia. φ 130 mm (5.12 in) (Cable cross-section diameter: 5 mm (0.20 in); tip cap diameter: 7 mm (0.28 in))
AC Current 419.9 A/ 4199 A, 2 ranges (±3.0 % rdg. ±5 dgt.)
Cable length 800 mm (31.5 in)

Catalogs

CLAMP ON HiTESTER Series

Rugged & Compact

Manuals

AC CLAMP METER 3280-10F,3280-20F [713KB]

AC CLAMP METER 3280-10F,3280-20F [726KB]

AC CLAMP METER 3280-10F,3280-20F [654KB]

AC CLAMP METER 3280-10F,3280-20F [529KB]

AC CLAMP METER 3280-10F,3280-20F [6MB]

AC CLAMP METER 3280-10F,3280-20F [5MB]

Declaration of Conformity

AC CLAMP METER 3280-10F, 3280-20F [100KB]

Others

Usable temperature range Max.65°C Max.-25°C

Options

Bundled Accessories

 

CARRYING CASE 9398

TEST LEAD L9208

70 cm (2.30 ft) length

Input cable options

Test Pin Set L4932 is required when using the Small Alligator Clip Set L4934.

 

SMALL ALLIGATOR CLIP SET L4934

Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300V, CAT II 600V

Options

 

AC FLEXIBLE CURRENT SENSOR CT6280

Includes C0205 and attachment

CARRYING CASE C0205

For storing the CT6280, L9208 and main body

Test leads A

Options for the L9207-10

 

CONTACT PIN SET L4933

Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 70V DC/ 33V AC

Test the Voltage after Replacing an LED Lighting Fixture 

There are no drivers, firmware or software available for this product.

Translate »